HT-91510 Hygiene Station Hygiene Station have automatic soap dispenser to wash the hands, Hand dryer with HEPA filter, automatic disinfection unit with spray nozzles by sanitizing agent to sanitizing the hands, rolled brush cleaner is running to clean the footwear ( Can add soap or sanitizing into it to clean the oil or sterilize it. ), with tripod turnstile controlled passage, Hand Wash station and Footwear Cleaning are made of stainless steel 304 which is preventing from rust, and it is easy to clean, the working lifetime is long, 5-7years at least. Functions: Hygiene Station-----Hand Washing And Footwear Cleaning the same time. Functions: 1. Hand Wash Station --- Hand wash basin with sensor, automatic soap dispenser, Hand dryer with heap filter, Hand disinfection turnstile. 2. Sole Cleaning Features: Full automatic work by infrared sensor, no touch operation to avoiding to cross contamination. One-stop integrated type include both hand washing and footwear clean and disinfect functions. Hand washing function: Inductive soap liquid dispenser, inductive washing hand, inductive drying hand, inductive disinfection. Sole cleaning function: cleaning the sole automatically by sensor, built-in tank is convenient to join all kinds of detergents and disinfectants. Tripod turnstile:User are coerced into cleaning and disinfecting hand before entrance. Working Principle: 2 set of rollers brush which are driven by motor to clean the shoe sole. People stand on the cleaning area, the brush rotation to scrub soles, then make cleaning effect. Can be with soap. Inductive soap liquid dispenser,Hand washing, hand Drying, Hand disinfecting. PLC control Installation: Installation area should be flat on the ground, put it on the floor, use directly indoor. Need to connect water in and water out pipe connection (refer to the following technical parameters Working voltage is AC220V, 50/60HZ, 1Ph. Standard Size and Specifications:
NO | Name | Model | Person | QTY | unit | Remark |
1 | Sole cleaning machine and Hand Washer | HT-91510 | Single person | 1 | set | Standard |
2 | Handle | Standard | 2 | set | ||
3 | Foot board | Standard | 2 | nos | ||
4 | Container of disinfectant for hand | 5L | 1 | nos | ||
5 | Container of Soap for sole | 10L | 1 | nos | ||
6 | Container of soap for hand | 2.5L | - | nos | ||
7 | Brush | Standard | 2 | nos |
Model | HT-91510 |
Original | Made in China |
Electric control | Sensors: OMRON PLC: OMRON Power control: Weidmuller Leakage protection:Schneider |
Cleaning model/water temperature | circulate-line /cleaning with water/10-30 |
Cleaning type/Clean length | Roller brush 2 set/Length 1000mm |
Brush material | Nylon |
Function: | Inductive soap liquid dispenser,Hand washing, hand Drying, Hand disinfecting/footwear cleaning |
Disinfectant volume | 5L |
Inlet part/pressure | SS304 Solenoid valve/pressure 10KG, working pressure 3-5KGS |
Inlet connector | DN25/ 3/4" internal threaded |
Disinfectant volume for sole | 10L |
Water level control | ball float valve(DC24V) |
Water out way | Floor drain |
Drainage connector | DN50mm |
Start type | Start upon sensor induction, stop upon time out (30-60s) |
Soap liquid | Inductive soap liquid dispenser |
Tap for hand | Inductive hand washing |
Hand Disinfecting | Inductive spray to disinfect |
Tripod turnstile | Only enter after Hand disinfection |
Voltage | AC220 50/60Hz,single phase |
Motor power | 120W |
Total power | 2300W |
Sate guard | Leakage/overload/short circuit |
Main material | SUS304 |
Size( LxWxH)mm | 2200x850x1718mm |
Weight (KGS) | 310KG |
Packing | Plywood case |
Can be design the machine according to the functions of customer required